Valence Get the game

Dynamic Reactions (part 2 of 3)

21 practice questions for Senior Chemistry I (Year 11, Grade 11) chemistry. Try each one, then open the answer for the explanation and a tip to remember it.

  1. 1.According to the Brønsted–Lowry definition, what is an acid?

    1. AA substance that loses electrons
    2. BA substance that accepts a proton (H⁺)
    3. CA substance that donates a proton (H⁺)
    4. DA substance that releases OH⁻
    Show the answer

    Answer: C. A substance that donates a proton (H⁺)

    The answer is a substance that donates a proton (H⁺). In the Brønsted–Lowry definition, an acid is a proton donor that gives H⁺, and a base is a proton acceptor that takes H⁺. It's called a proton because H⁺ is a hydrogen atom without its electron — just a nucleus, a single proton. 'A substance that releases OH⁻' is the Arrhenius definition of a base.

    Remember: Brønsted–Lowry: acid = H⁺ donor, base = H⁺ acceptor. Remember: the giver is the acid.

    Did you know? This definition was published separately in 1923 by Brønsted in Denmark and Lowry in England, so it carries both their names.

  2. 2.In the reaction NH₃ + H₂O ⇌ NH₄⁺ + OH⁻, what is the role of H₂O? (Brønsted–Lowry definition)

    1. ANeither an acid nor a base
    2. BCatalyst
    3. CBase
    4. DAcid
    Show the answer

    Answer: D. Acid

    The answer is acid. Comparing before and after, H₂O became OH⁻, losing one H⁺, and NH₃ became NH₄⁺, gaining one H⁺. H₂O, which gave the H⁺, is the Brønsted–Lowry acid, and NH₃, which received it, is the base. It's easy to pick 'base' by confusing this with the HCl reaction, where water usually acts as a base.

    Remember: Water's role changes depending on its partner. If it becomes OH⁻ after the reaction, it's an acid; if it becomes H₃O⁺, it's a base.

    Did you know? Many glass cleaners contain ammonia, because it cleans greasy grime well and evaporates quickly without leaving streaks.

  3. 3.In the reaction HCl + H₂O → H₃O⁺ + Cl⁻, what is the role of H₂O? (Brønsted–Lowry definition)

    1. AAcid
    2. BBase
    3. COxidizing agent
    4. DCatalyst
    Show the answer

    Answer: B. Base

    The answer is base. Comparing before and after, HCl became Cl⁻, losing H⁺, and H₂O became H₃O⁺, gaining H⁺. H₂O, which received the H⁺, is the Brønsted–Lowry base, and HCl, which gave it, is the acid. It's the opposite of the reaction with NH₃, where water was the acid, so it's easy to confuse.

    Remember: H₂O → H₃O⁺ means it received H⁺, so it's a base. Compare the number of H atoms in the formulas on each side of the arrow.

    Did you know? H⁺ can't float around on its own in water; it immediately attaches to a water molecule and exists as a hydronium ion.

  4. 4.What do we call a substance that can act as an acid in some reactions and as a base in others?

    1. AIndicator
    2. BCatalyst
    3. CAmphoteric substance
    4. DNeutralizer
    Show the answer

    Answer: C. Amphoteric substance

    The answer is an amphoteric (amphiprotic) substance: one that can either give or take H⁺, depending on its partner. Water is the classic example, acting as a base when it takes H⁺ from HCl and as an acid when it gives H⁺ to NH₃. An indicator changes color with pH, and a catalyst changes reaction speed, so they mean different things.

    Remember: Substances that can both give and take H⁺, like water, HCO₃⁻ and HSO₄⁻, are amphoteric.

    Did you know? Aluminum hydroxide is an amphoteric substance that reacts with both acids and bases, and it's used in antacids to soothe heartburn.

  5. 5.What is the conjugate acid of ammonia (NH₃)?

    1. ANH₄⁺
    2. BHNO₃
    3. CN₂
    4. DNH₂⁻
    Show the answer

    Answer: A. NH₄⁺

    The answer is NH₄⁺. A conjugate acid is what a base becomes after accepting one H⁺. Since NH₃ + H⁺ → NH₄⁺, the conjugate acid of NH₃ is NH₄⁺, and the two form a conjugate acid–base pair that differs by one H⁺. NH₂⁻ is what NH₃ becomes after losing H⁺, so it's the conjugate base, and N₂ and HNO₃ don't differ by one H⁺.

    Remember: Conjugate acid: add one H⁺ (charge +1). Conjugate base: remove one H⁺ (charge −1).

    Did you know? Ammonium chloride (NH₄Cl) is used as the electrolyte in zinc–carbon batteries and as a flux for soldering metals.

  6. 6.When gaseous HCl and gaseous NH₃ meet and form white smoke (NH₄Cl), what is the role of NH₃?

    1. AArrhenius base
    2. BBrønsted–Lowry acid
    3. CBrønsted–Lowry base
    4. DArrhenius acid
    Show the answer

    Answer: C. Brønsted–Lowry base

    The answer is a Brønsted–Lowry base. In NH₃ + HCl → NH₄Cl, NH₃ accepts H⁺ from HCl and becomes NH₄⁺, so it's a proton acceptor — a base. This reaction happens between gases, with no water and no OH⁻ formed, so the Arrhenius definition, which assumes a water solution, can't explain NH₃ as a base.

    Remember: Reactions without water, and bases without OH⁻ (like NH₃), are explained with the Brønsted–Lowry definition.

    Did you know? The ring of white smoke forms closer to the heavier HCl, because the lighter NH₃ molecules spread faster.

  7. 7.Which property do acid solutions have in common?

    1. AThey turn phenolphthalein red
    2. BThey react with metals like magnesium to produce hydrogen gas
    3. CThey dissolve proteins and feel slippery
    4. DThey turn red litmus paper blue
    Show the answer

    Answer: B. They react with metals like magnesium to produce hydrogen gas

    The answer is that they react with metals like magnesium to produce hydrogen gas. The common properties of acid solutions come from H⁺. When Mg loses electrons to become Mg²⁺, H⁺ gains electrons and H₂ gas forms. Turning phenolphthalein red, dissolving proteins and feeling slippery, and turning red litmus blue are all properties of bases, caused by OH⁻.

    Remember: Acids turn blue litmus red, and bases turn red litmus blue. It's easy to learn these backwards.

    Did you know? If you hold a lit match to the gas collected, you hear a 'pop' — evidence that hydrogen is there.

  8. 8.What color appears when phenolphthalein solution is added to a basic solution?

    1. AColorless
    2. BPink
    3. CYellow
    4. DBlue
    Show the answer

    Answer: B. Pink

    The answer is pink. Phenolphthalein is colorless in acidic and neutral solutions and turns pink only in basic solutions. That's why, in a titration where base is added to acid, the solution starting to turn pink means the endpoint has been passed. Colorless is the color in acidic or neutral solutions, and yellow and blue are colors of bromothymol blue (BTB).

    Remember: Phenolphthalein is also colorless in neutral solutions. Don't conclude a solution is acidic just because it's colorless.

    Did you know? Phenolphthalein starts turning pink at about pH 8.2, and in very strong bases above pH 13 it loses its color again.

  9. 9.What color is bromothymol blue (BTB) solution when added to an acidic solution?

    1. ARed
    2. BYellow
    3. CGreen
    4. DBlue
    Show the answer

    Answer: B. Yellow

    The answer is yellow. BTB is yellow in acidic solutions, green in neutral ones and blue in basic ones. It was added to an acidic solution, so it turns yellow. Blue is the basic color and green the neutral color, and red is phenolphthalein's color in bases, so mixing up the indicators leads to wrong answers.

    Remember: BTB goes yellow → green → blue from acid to neutral to base. Red isn't a BTB color; it's phenolphthalein (in a base).

    Did you know? Blow into green BTB solution through a straw, and the CO₂ in your breath dissolves and turns it yellow.

  10. 10.Which is the correct net ionic equation for neutralization?

    1. ANa⁺ + Cl⁻ → NaCl
    2. BH⁺ + Cl⁻ → HCl
    3. CH⁺ + OH⁻ → H₂O
    4. DH₂ + O₂ → H₂O₂
    Show the answer

    Answer: C. H⁺ + OH⁻ → H₂O

    The answer is H⁺ + OH⁻ → H₂O. A net ionic equation shows only the ions that actually react. For example, in the neutralization of HCl and NaOH, Na⁺ and Cl⁻ stay unchanged in the solution before and after, so they're spectator ions and are left out. Na⁺ + Cl⁻ → NaCl just groups the spectator ions together, so it isn't the net reaction.

    Remember: Whatever the acid and base, the net reaction of neutralization is the single equation H⁺ + OH⁻ → H₂O. Leave out the spectator ions.

    Did you know? Spreading powdered lime on acidified lakes or fields to raise the pH also uses neutralization.

  11. Getting these right? In Valence, a correct answer earns research funds for your next card. Play free and set the quiz level to Chemistry I.

  12. 11.When hydrochloric acid (HCl) and sodium hydroxide (NaOH) neutralize completely, what is the mole ratio in which they react (HCl : NaOH)?

    1. A1 : 3
    2. B1 : 2
    3. C1 : 1
    4. D2 : 1
    Show the answer

    Answer: C. 1 : 1

    The answer is 1 : 1. Neutralization is H⁺ and OH⁻ reacting 1 : 1. 1 mol of HCl releases 1 mol of H⁺, and 1 mol of NaOH releases 1 mol of OH⁻, so HCl and NaOH also react 1 : 1. An acid like H₂SO₄, which releases 2 H⁺, reacts with NaOH 1 : 2, so don't confuse it with that case.

    Remember: Neutralization is based on moles of H⁺ and OH⁻, not moles of the substances. First check how many H⁺ or OH⁻ each acid or base releases.

    Did you know? The folk remedy of dabbing dilute ammonia solution on mosquito or ant bites is another example of using neutralization.

  13. 12.What volume of 0.1 M sodium hydroxide solution is needed to completely neutralize 100 mL of 0.1 M hydrochloric acid?

    1. A50 mL
    2. B10 mL
    3. C200 mL
    4. D100 mL
    Show the answer

    Answer: D. 100 mL

    The answer is 100 mL. The rule is moles of H⁺ = moles of OH⁻, that is, M₁V₁ = M₂V₂. Plugging in, moles of H⁺ = 0.1 M × 0.1 L = 0.01 mol, and the NaOH volume needed = 0.01 mol ÷ 0.1 M = 0.1 L = 100 mL. The two solutions have the same concentration and each releases one H⁺ or OH⁻, so the volumes are the same.

    Remember: Moles = molarity × volume (L). If you don't convert mL to L, your answer will be off by 1000 times.

    Did you know? Near the endpoint, just a few drops make the pH jump sharply. A graph of these pH changes is called a titration curve.

  14. 13.What volume of 0.1 M sodium hydroxide solution is needed to completely neutralize 50 mL of 0.2 M hydrochloric acid?

    1. A25 mL
    2. B50 mL
    3. C200 mL
    4. D100 mL
    Show the answer

    Answer: D. 100 mL

    The answer is 100 mL. The rule is moles of H⁺ = moles of OH⁻. Plugging in, moles of H⁺ = 0.2 M × 0.05 L = 0.01 mol, and the volume of 0.1 M NaOH = 0.01 mol ÷ 0.1 M = 0.1 L = 100 mL. It's tempting to pick 50 mL, the same as the acid, but the NaOH is half as concentrated, so you need twice the volume.

    Remember: Neutralizing with a solution half as concentrated takes twice the volume. Work out the moles first and you won't get confused.

    Did you know? When diluting concentrated acid, pour the acid into water a little at a time. Doing it the other way can release heat all at once and make it splash.

  15. 14.How many moles of NaOH are needed to completely neutralize 100 mL of 0.1 M sulfuric acid (H₂SO₄)?

    1. A0.01 mol
    2. B0.1 mol
    3. C0.02 mol
    4. D0.2 mol
    Show the answer

    Answer: C. 0.02 mol

    The answer is 0.02 mol. H₂SO₄ is a diprotic acid that releases 2 mol of H⁺ per mole. Moles of H⁺ = molarity × volume × 2, so 0.1 M × 0.1 L × 2 = 0.02 mol. NaOH releases one OH⁻, so 0.02 mol of NaOH is needed. Forgetting the × 2 gives the wrong answer, 0.01 mol.

    Remember: H₂SO₄ is a diprotic acid with 2 H⁺. In sulfuric acid problems, always think '× 2' first.

    Did you know? Sulfuric acid is one of the most produced chemicals in the world, and its biggest use is in the fertilizer industry.

  16. 15.It took 20 mL of 0.1 M NaOH solution to neutralize 10 mL of vinegar. What is the molarity of acetic acid in the vinegar?

    1. A2 M
    2. B0.2 M
    3. C0.1 M
    4. D0.05 M
    Show the answer

    Answer: B. 0.2 M

    The answer is 0.2 M. Acetic acid (CH₃COOH) releases one H⁺, so it reacts with NaOH 1 : 1. Moles of NaOH = 0.1 M × 0.02 L = 0.002 mol, and the same number of moles of acetic acid is in 0.01 L of vinegar. Molarity = 0.002 mol ÷ 0.01 L = 0.2 M. Applying the volume ratio the wrong way round gives 0.05 M.

    Remember: If the titration needed a larger volume of the titrant, the solution being titrated is the more concentrated one. Do a quick check on the size of your answer.

    Did you know? Store-bought vinegar usually contains about 4–7% acetic acid, and the rest is almost all water.

  17. 16.In a titration, which piece of equipment is used to add a solution of known concentration a little at a time while measuring its volume precisely?

    1. ABeaker
    2. BBurette
    3. CGraduated cylinder
    4. DFunnel
    Show the answer

    Answer: B. Burette

    The answer is the burette. A burette is a long, thin tube with fine markings and a tap (stopcock) at the bottom that lets you add solution drop by drop. The difference in readings before and after the titration tells you exactly how much you added. A graduated cylinder also measures volume, but it's less precise and can't add liquid a little at a time, so it isn't used for titrations.

    Remember: The pipette is for transferring an exact volume of solution; the burette is for adding solution bit by bit while measuring the volume.

    Did you know? Burette markings are usually 0.1 mL apart. When reading one, put your eye level with the liquid surface and read the bottom of the curved surface (meniscus).

  18. 17.When sodium hydroxide solution is added little by little to dilute hydrochloric acid, which ion originally in the acid stays the same in number up to the neutralization point?

    1. ACl⁻
    2. BBoth H⁺ and Cl⁻
    3. CNa⁺
    4. DH⁺
    Show the answer

    Answer: A. Cl⁻

    The answer is Cl⁻. At first, the hydrochloric acid contains H⁺ and Cl⁻. As NaOH is added, OH⁻ meets H⁺ and forms water, so H⁺ decreases, while Na⁺ doesn't react and keeps building up. Cl⁻ doesn't take part in the reaction and isn't being added either, so its number stays the same. Up to the neutralization point, the decrease in H⁺ equals the increase in Na⁺, so the total number of ions also stays constant.

    Remember: Of the spectator ions, the one that was there from the start (Cl⁻) stays constant, and the one being added (Na⁺) increases.

    Did you know? When the number of ions in a solution changes, so does how well it conducts electricity, so the neutralization point can also be found by measuring the current.

  19. 18.When an acid and a base are mixed, what happens to the temperature of the solution at the neutralization point?

    1. AIt becomes 0 °C
    2. BIt reaches its lowest
    3. CIt doesn't change
    4. DIt reaches its highest
    Show the answer

    Answer: D. It reaches its highest

    The answer is that it reaches its highest. Neutralization is exothermic: heat is released as H⁺ and OH⁻ form water. As more is added, more reacts and the temperature rises, and at the neutralization point the most has reacted, so the temperature peaks. After that, no more reaction happens, and the added solution cools the mixture, so the temperature falls.

    Remember: The highest temperature point = the neutralization point. Find the peak on the graph to find the neutralization point.

    Did you know? Each time a strong acid and a strong base react to form 1 mol of water, about 56 kJ of heat is released.

  20. 19.In terms of electron transfer, what is the definition of oxidation?

    1. ALosing electrons
    2. BLosing neutrons
    3. CGaining electrons
    4. DGaining protons
    Show the answer

    Answer: A. Losing electrons

    The answer is losing electrons. In terms of electron transfer, oxidation is losing electrons and reduction is gaining electrons. For example, in Na → Na⁺ + e⁻, Na lost an electron, so it was oxidized. Gaining electrons is reduction, the opposite, and the movement of protons or neutrons isn't the basis for oxidation and reduction.

    Remember: Losing electrons raises the oxidation number. Remember 'OIL RIG': Oxidation Is Loss, Reduction Is Gain.

    Did you know? A cut apple turning brown is also because substances in the apple are oxidized by oxygen in the air.

  21. 20.In terms of oxygen transfer, what is the definition of oxidation?

    1. ALosing oxygen
    2. BGaining oxygen
    3. CGaining electrons
    4. DGaining hydrogen
    Show the answer

    Answer: B. Gaining oxygen

    The answer is gaining oxygen. In terms of oxygen transfer, a substance combining with oxygen is oxidation, and losing oxygen is reduction. For example, when carbon burns to CO₂, it gains oxygen, so it's oxidized. Gaining hydrogen is reduction, and gaining electrons is also reduction, so they go the opposite way.

    Remember: Gaining oxygen is oxidation; gaining hydrogen or electrons is reduction. Oxygen alone goes the other way.

    Did you know? In the 18th century, Lavoisier showed that burning is a substance combining with oxygen, overturning the 'phlogiston theory'.

  22. Getting these right? In Valence, a correct answer earns research funds for your next card. Play free and set the quiz level to Chemistry I.

  23. 21.In terms of hydrogen transfer, what is the definition of reduction?

    1. ALosing electrons
    2. BLosing hydrogen
    3. CGaining oxygen
    4. DGaining hydrogen
    Show the answer

    Answer: D. Gaining hydrogen

    The answer is gaining hydrogen. In terms of hydrogen transfer, gaining hydrogen is reduction and losing it is oxidation. For example, in photosynthesis, CO₂ gains hydrogen to become glucose, so it's reduced, and H₂O loses hydrogen to become O₂, so it's oxidized. Gaining oxygen is oxidation, so if you learn oxygen and hydrogen as going the same way, you'll get it wrong.

    Remember: Hydrogen and oxygen go opposite ways. Gaining hydrogen = losing oxygen = reduction.

    Did you know? Margarine is made by adding hydrogen to vegetable oil to make it solid. That's also a reduction, gaining hydrogen.

Previous: part 1Next: part 3 of 3Today's five Senior Chemistry I questions

More Senior Chemistry I topics

First Steps in Chemistry · The World of Atoms · Bonds and Molecules

Other levels: Year 7 · Year 8 · Year 9 · Year 10 · Senior Chemistry II. Lesson plans: free worksheets.

Last updated 10 November 2026.