Valence Get the game

States of Matter and Solutions (part 1 of 3)

24 practice questions for Senior Chemistry II (Year 12, Grade 12) chemistry. Try each one, then open the answer for the explanation and a tip to remember it.

  1. 1.At constant temperature, what happens to the volume of a fixed amount of gas if you double the pressure on it?

    1. AIt becomes 2 times the original
    2. BIt becomes 4 times the original
    3. CIt becomes 1/2 of the original
    4. DIt stays the same
    Show the answer

    Answer: C. It becomes 1/2 of the original

    The answer is 'it becomes 1/2 of the original'. Boyle’s law says that when temperature and amount of gas are constant, pressure and volume are inversely proportional (PV = constant). From P₁V₁ = (2P₁)V₂, we get V₂ = V₁/2. ‘2 times’ comes from mistaking it for a direct proportion, and ‘4 times’ comes from wrongly assuming a squared relationship.

    Remember: Pressure and volume are inversely proportional. Picture a syringe: the harder you push, the smaller the volume gets.

    Did you know? In 1662, Boyle announced this relationship after an experiment in which he poured mercury into a J-shaped glass tube, squeezing the trapped air and measuring its volume.

  2. 2.For Boyle’s law to hold, which conditions must stay constant?

    1. APressure and temperature
    2. BVolume and amount of gas
    3. CTemperature and amount of gas
    4. DPressure and volume
    Show the answer

    Answer: C. Temperature and amount of gas

    The answer is ‘temperature and amount of gas’. Boyle’s law states that pressure and volume are inversely proportional when temperature and the number of moles are constant. Pressure and volume are the two quantities that change, so they can’t be held constant. Keeping ‘pressure and temperature’ constant is the setup for Avogadro’s law, which relates volume and moles.

    Remember: For each gas law, pair up the ‘two quantities that change’ with the ‘two that are fixed’. For Boyle, T and n are fixed.

    Did you know? If a scuba diver holds their breath and rises quickly, the air in their lungs expands and can cause injury. That’s why divers are taught to breathe out slowly as they ascend.

  3. 3.At constant temperature, a gas occupies 6 L at 1 atm. If it is compressed to 3 atm, what is its volume?

    1. A3 L
    2. B9 L
    3. C2 L
    4. D18 L
    Show the answer

    Answer: C. 2 L

    The answer is 2 L. Since temperature is constant, use Boyle’s law, P₁V₁ = P₂V₂. Substituting gives 1 atm × 6 L = 3 atm × V₂, so V₂ = 6 ÷ 3 = 2 L. 18 L is the mistake of multiplying pressure and volume as if they were directly proportional, and 3 L just repeats the pressure value of 3 as the answer.

    Remember: Compressing a gas must make its volume smaller. If your answer is larger than the starting volume, check your work again.

    Did you know? Underwater, the pressure increases by about 1 atm for every 10 m you descend. So at a depth of 10 m, a balloon has about half the volume it had at the surface.

  4. 4.At constant pressure, what happens to the volume of a fixed amount of gas if its absolute temperature is doubled?

    1. AIt becomes 2 times the original
    2. BIt becomes 1/2 of the original
    3. CIt stays the same
    4. DIt becomes 4 times the original
    Show the answer

    Answer: A. It becomes 2 times the original

    The answer is 'it becomes 2 times the original'. Charles’s law says that when pressure and amount of gas are constant, volume is directly proportional to absolute temperature (V/T = constant). From V₁/T₁ = V₂/(2T₁), we get V₂ = 2V₁. ‘1/2’ comes from confusing it with the inverse relationship in Boyle’s law.

    Remember: Volume is proportional to ‘absolute temperature’. Doubling the Celsius temperature does not double the volume.

    Did you know? Charles was also one of the first people to fly in a hydrogen balloon, in 1783. The law became widely known when Gay-Lussac published it in 1802.

  5. 5.At constant pressure, a gas occupies 3 L at 27 °C. If it is heated to 327 °C, what is its volume?

    1. A1.5 L
    2. B3 L
    3. C36 L
    4. D6 L
    Show the answer

    Answer: D. 6 L

    The answer is 6 L. Charles’s law, V₁/T₁ = V₂/T₂, must be calculated with absolute temperatures (K). 27 °C = 300 K and 327 °C = 600 K, so 3/300 = V₂/600 and V₂ = 6 L. If you plug in the Celsius values directly, you get the wrong answer 3 × 327/27 ≈ 36 L.

    Remember: If you forget to add 273 to convert Celsius to K, you’ll fall into a trap answer like 36 L.

    Did you know? A hot-air balloon uses a burner to heat the air inside it. The warm air expands and some of it escapes, so the balloon becomes lighter inside and rises.

  6. 6.Absolute zero, 0 K, is approximately what temperature in degrees Celsius?

    1. A273 °C
    2. B−273 °C
    3. C0 °C
    4. D−100 °C
    Show the answer

    Answer: B. −273 °C

    The answer is about −273 °C. Absolute temperature and Celsius temperature are related by T(K) = t(°C) + 273. From 0 = t + 273, t = −273 °C. 273 °C has the sign flipped, and 0 °C comes from wrongly thinking the zero points of the Celsius and absolute scales are the same.

    Remember: K = °C + 273. Since 0 K is the lowest possible temperature, it must be a negative Celsius temperature.

    Did you know? Lord Kelvin (William Thomson) proposed the absolute temperature scale in 1848, which is why its unit is named K. The more precise value is −273.15 °C.

  7. 7.Which phenomenon can be explained by Charles’s law?

    1. AA dented ping-pong ball pops back into shape in hot water
    2. BA sealed snack bag puffs up on a high mountain
    3. CBlocking the tip of a syringe and pushing makes the volume shrink
    4. DA diver’s air bubbles grow as they rise
    Show the answer

    Answer: A. A dented ping-pong ball pops back into shape in hot water

    The answer is ‘a dented ping-pong ball pops back into shape in hot water’. Charles’s law says that at constant pressure, a gas’s volume increases as its temperature rises. The air inside the ball warms up and expands, pushing the dent out. The snack bag, syringe and air bubbles all involve a change in pressure, so they are explained by Boyle’s law.

    Remember: If something is ‘heated or cooled’, think Charles’s law. If it is ‘squeezed, or its height or depth changes’, think Boyle’s law.

    Did you know? If you put a balloon in liquid nitrogen (about −196 °C), it shrivels up, then puffs back up when you take it out. It’s a classic demonstration that lets you see Charles’s law with your own eyes.

  8. 8.A sealed snack bag puffs up when you take it up a high mountain. Which law is most closely related to this?

    1. ABoyle’s law
    2. BAvogadro’s law
    3. CHess’s law
    4. DCharles’s law
    Show the answer

    Answer: A. Boyle’s law

    The answer is Boyle’s law. High on a mountain the air pressure is lower, so less pressure pushes on the bag from outside. When the pressure drops, the gas inside the bag expands, which is the inverse relationship between pressure and volume: Boyle’s law. Charles’s law applies when temperature change is the cause, but it is actually colder up on a mountain.

    Remember: The key change on a high mountain is that ‘the air pressure gets lower’. Focus on pressure rather than temperature.

    Did you know? Airplane cabins are pressurized to roughly the air pressure at about 2,000 m above sea level. That’s why snack bags puff up on flights and your ears can feel blocked.

  9. 9.Which statement correctly describes Avogadro’s law?

    1. AEqual volumes of gases have the same mass regardless of the type of gas
    2. BAt the same temperature and pressure, equal volumes of gases contain the same number of molecules
    3. CAt the same temperature, all gases have the same mass
    4. DThe volume of a gas is directly proportional to its pressure
    Show the answer

    Answer: B. At the same temperature and pressure, equal volumes of gases contain the same number of molecules

    The answer is ‘at the same temperature and pressure, equal volumes of gases contain the same number of molecules’. According to Avogadro’s law, when T and P are the same, a gas’s volume is proportional to its number of molecules (moles). Even with the same number of molecules, each molecule has a different mass, so different gases have different masses. That’s why the choices saying ‘the mass is the same’ are wrong.

    Remember: Equal volumes mean the same ‘number of molecules’, not the same ‘mass’.

    Did you know? Avogadro published this idea in 1811, but it was ignored. About 50 years later, at a conference in 1860, Cannizzaro presented it and it finally became accepted.

  10. 10.What is the approximate volume of 1 mol of gas at 0 °C and 1 atm?

    1. A22.4 L
    2. B11.2 L
    3. C1 L
    4. D44.8 L
    Show the answer

    Answer: A. 22.4 L

    The answer is about 22.4 L. By Avogadro’s law, at the same temperature and pressure, 1 mol of any gas has the same volume. At 0 °C and 1 atm, V = nRT/P = 1 × 0.082 × 273 ÷ 1 ≈ 22.4 L. 11.2 L is the volume of 0.5 mol, and 44.8 L is the volume of 2 mol.

    Remember: Use 22.4 L only at 0 °C and 1 atm. At 25 °C, it changes to about 24.5 L.

    Did you know? In 1982, the International Union of Pure and Applied Chemistry (IUPAC) changed the standard pressure to 1 bar (100 kPa). That’s why some university textbooks today use 22.7 instead of 22.4.

  11. Getting these right? In Valence, a correct answer earns research funds for your next card. Play free and set the quiz level to Chemistry II.

  12. 11.How many moles of oxygen gas occupy 44.8 L at 0 °C and 1 atm?

    1. A0.5 mol
    2. B4 mol
    3. C2 mol
    4. D1 mol
    Show the answer

    Answer: C. 2 mol

    The answer is 2 mol. At 0 °C and 1 atm, 1 mol of gas occupies 22.4 L, so moles = volume ÷ 22.4 L. Substituting gives 44.8 ÷ 22.4 = 2 mol. 0.5 mol comes from dividing the wrong way round (22.4 ÷ 44.8), and the fact that the gas is oxygen doesn’t affect the mole calculation.

    Remember: Moles of gas = ‘volume ÷ 22.4’. You don’t need oxygen’s molecular mass of 32 for this calculation.

    Did you know? 22.4 L is about the volume of a cube-shaped box with edges about 28 cm long. Inside it are about 6.02×10²³ molecules.

  13. 12.Which is the correct ideal gas equation?

    1. AP = nRTV
    2. BPV = nR/T
    3. CPV = nRT
    4. DPT = nRV
    Show the answer

    Answer: C. PV = nRT

    The answer is PV = nRT. Combining Boyle’s law (V ∝ 1/P), Charles’s law (V ∝ T) and Avogadro’s law (V ∝ n) gives V ∝ nT/P, and adding the proportionality constant R gives PV = nRT. PV = nR/T wrongly makes temperature inversely proportional, and PT = nRV swaps the places of volume and temperature.

    Remember: Remember it as ‘P-V equals n-R-T’, and check the equation by asking whether PV gets bigger when temperature rises.

    Did you know? This equation was first put together in 1834 by the French engineer Clapeyron, who combined several gas laws into one. That’s why it’s sometimes called the ‘Clapeyron equation’.

  14. 13.2 mol of gas is in a 4.1 L container at 300 K. What is the pressure? (R = 0.082 atm·L/(mol·K))

    1. A6 atm
    2. B1.2 atm
    3. C12 atm
    4. D24 atm
    Show the answer

    Answer: C. 12 atm

    The answer is 12 atm. Solving the ideal gas equation PV = nRT for P gives P = nRT/V. Substituting gives P = 2 × 0.082 × 300 ÷ 4.1 = 49.2 ÷ 4.1 = 12 atm. 6 atm is the value you get if you forget to multiply by the 2 mol, and 24 atm comes from multiplying by 2 one extra time.

    Remember: Multiply n, R and T, then divide by V. Always check you haven’t left out the number of moles.

    Did you know? Older car airbags inflated when sodium azide (NaN₃) decomposed at the moment of a crash, producing nitrogen gas almost instantly. The amount needed is calculated with this equation.

  15. 14.What is the approximate volume of 0.5 mol of gas at 273 K and 1 atm? (R = 0.082 atm·L/(mol·K))

    1. AAbout 44.8 L
    2. BAbout 22.4 L
    3. CAbout 5.6 L
    4. DAbout 11.2 L
    Show the answer

    Answer: D. About 11.2 L

    The answer is about 11.2 L. Solving the ideal gas equation for V gives V = nRT/P. Substituting gives V = 0.5 × 0.082 × 273 ÷ 1 ≈ 11.2 L. 22.4 L is the volume of 1 mol, so it forgets to multiply by 0.5 mol. Since the conditions are 273 K and 1 atm, solving it as 22.4 L × 0.5 gives the same answer.

    Remember: At 273 K and 1 atm, you can get the answer directly as ‘moles × 22.4 L’.

    Did you know? The gas constant R is written as 0.082 atm·L/(mol·K) or 8.314 J/(mol·K), depending on the units. When calculating energy, use 8.314.

  16. 15.Which statement about an ideal gas is correct?

    1. AIt assumes the molecules themselves have a very large volume
    2. BIt assumes there are no attractive or repulsive forces between molecules
    3. CIt always becomes a solid when cooled
    4. DIt liquefies more easily than a real gas
    Show the answer

    Answer: B. It assumes there are no attractive or repulsive forces between molecules

    The answer is ‘it assumes there are no attractive or repulsive forces between molecules’. An ideal gas is a model that treats the volume of the molecules themselves as zero and assumes there are no forces between them. With no attraction between molecules, it never liquefies or turns solid. ‘The molecules have a very large volume’ is the exact opposite of the assumption, and ‘liquefies easily’ is also wrong.

    Remember: An ideal gas has ‘zero volume and zero forces’. That’s why it can never be liquefied.

    Did you know? The equation that corrects for real gases’ attractions and molecule sizes is called the van der Waals equation. Van der Waals won the 1910 Nobel Prize in Physics for this work.

  17. 16.Under which conditions does a real gas behave most like an ideal gas?

    1. AHigh temperature, low pressure
    2. BHigh temperature, high pressure
    3. CLow temperature, high pressure
    4. DLow temperature, low pressure
    Show the answer

    Answer: A. High temperature, low pressure

    The answer is ‘high temperature, low pressure’. At high temperature, molecules move fast, so the attractions between them matter less. At low pressure, molecules are far apart, so the volume of the molecules themselves can be ignored. Low temperature and high pressure are actually the conditions where molecules clump together and liquefy easily, so they are furthest from ideal behavior.

    Remember: Remember the pair: ‘high temperature, low pressure’ is ideal; ‘low temperature, high pressure’ is the condition for liquefying.

    Did you know? Helium has such weak intermolecular forces that it only becomes a liquid when cooled to about −269 °C (4 K). That’s why it’s considered the real gas closest to an ideal gas.

  18. 17.At the same temperature and pressure, what is the mass ratio (H₂ : O₂) of equal volumes of hydrogen (H₂) and oxygen (O₂)? (H = 1, O = 16)

    1. A16 : 1
    2. B1 : 8
    3. C1 : 1
    4. D1 : 16
    Show the answer

    Answer: D. 1 : 16

    The answer is 1 : 16. At the same temperature and pressure, equal volumes contain the same number of molecules (moles), by Avogadro’s law. With equal moles, the mass ratio equals the ratio of molecular masses, so H₂ : O₂ = 2 : 32 = 1 : 16. 1 : 8 is the mistake of using 16 (the atomic mass) for O₂, and 16 : 1 writes the ratio in the wrong order.

    Remember: The molecular mass of H₂ is 2, not 1, and O₂ is 32, not 16. Don’t forget they are diatomic molecules.

    Did you know? Hydrogen is the lightest gas, so it was used in early airships. But after the Hindenburg disaster in 1937, non-flammable helium has been used instead.

  19. 18.Which statement correctly describes Dalton’s law of partial pressures?

    1. AThe total pressure of a gas mixture equals the pressure of the heaviest gas
    2. BThe total pressure of a gas mixture equals the product of the partial pressures
    3. CThe total pressure of a gas mixture equals the sum of the partial pressures of its component gases
    4. DAll the partial pressures in a gas mixture are equal
    Show the answer

    Answer: C. The total pressure of a gas mixture equals the sum of the partial pressures of its component gases

    The answer is 'the total pressure of a gas mixture equals the sum of the partial pressures of its component gases'. When gases that don’t react with each other are mixed, each gas exerts the same pressure it would if it filled the container alone. So P_total = P_A + P_B + …. Partial pressure is proportional to the number of moles, so it can differ from one gas to another; ‘all equal’ and ‘product’ are wrong.

    Remember: Partial pressure is proportional to mole fraction. The more moles a gas has, the larger its partial pressure.

    Did you know? Dalton recorded the weather every day from 1787 until his death. He discovered this law in 1801 while studying water vapor in the air.

  20. 19.A gas mixture at a total pressure of 2 atm contains 3 mol of nitrogen and 1 mol of oxygen. What is the partial pressure of oxygen?

    1. A0.25 atm
    2. B0.5 atm
    3. C1 atm
    4. D1.5 atm
    Show the answer

    Answer: B. 0.5 atm

    The answer is 0.5 atm. Partial pressure = total pressure × mole fraction. The mole fraction of oxygen is 1 ÷ (3 + 1) = 1/4, so P(O₂) = 2 atm × 1/4 = 0.5 atm. 1 atm comes from wrongly dividing by 2, and 1.5 atm is the partial pressure of nitrogen.

    Remember: The denominator of the mole fraction is the ‘total number of moles’. Don’t divide oxygen’s moles by nitrogen’s moles.

    Did you know? When diving deep, the partial pressure of nitrogen rises and can cause ‘nitrogen narcosis’, which clouds a diver’s judgment. That’s why deep divers breathe gas mixtures that include helium.

  21. 20.In a mixture of 1 mol of helium and 3 mol of neon, what is the mole fraction of helium?

    1. A0.33
    2. B0.25
    3. C1
    4. D0.75
    Show the answer

    Answer: B. 0.25

    The answer is 0.25. Mole fraction = ‘moles of the component ÷ total moles’. The mole fraction of helium = 1 ÷ (1 + 3) = 0.25. 0.33 is the mistake of dividing only by neon’s moles (1 ÷ 3), and 0.75 is the mole fraction of neon.

    Remember: All the mole fractions add up to 1. Check: helium 0.25 + neon 0.75 = 1.

    Did you know? Mole fraction has no units. You’ll use it again later with Raoult’s law to find the vapor pressure of a solution.

  22. Getting these right? In Valence, a correct answer earns research funds for your next card. Play free and set the quiz level to Chemistry II.

  23. 21.When air is at a pressure of 1 atm, what is the approximate partial pressure of oxygen in it?

    1. AAbout 1 atm
    2. BAbout 0.78 atm
    3. CAbout 0.01 atm
    4. DAbout 0.21 atm
    Show the answer

    Answer: D. About 0.21 atm

    The answer is about 0.21 atm. Dry air is about 78% nitrogen and about 21% oxygen by volume, and the volume ratio of gases equals their mole fraction. So P(O₂) = 1 atm × 0.21 ≈ 0.21 atm. 0.78 atm is the partial pressure of nitrogen, and 0.01 atm is roughly the value for argon and the other remaining gases.

    Remember: The most abundant gas in air is nitrogen (about 78%), not oxygen.

    Did you know? At the top of Mount Everest the air pressure is only about 0.33 atm, so the partial pressure of oxygen is just about 0.07 atm. That’s why most climbers carry oxygen tanks.

  24. 22.A container at constant temperature and volume holds nitrogen. If more helium is added, what happens to the partial pressure of nitrogen?

    1. AIt increases
    2. BIt doesn’t change
    3. CIt becomes 0
    4. DIt decreases
    Show the answer

    Answer: B. It doesn’t change

    The answer is ‘it doesn’t change’. Partial pressure is the pressure a gas would exert if it filled the container alone, so P(N₂) = n(N₂)RT/V. Adding helium doesn’t change nitrogen’s moles, the temperature or the volume, so nitrogen’s partial pressure stays the same. What increases is the total pressure, and what decreases is nitrogen’s mole fraction.

    Remember: The mole fraction drops but the total pressure rises, so nitrogen’s partial pressure (the product of the two) stays the same.

    Did you know? The humidity in a weather forecast is also related to the partial pressure of water vapor in the air. On hot, rainy, humid days this value is high, so laundry and sweat don’t dry well.

  25. 23.Which intermolecular interaction acts between all molecules?

    1. AIonic bonding
    2. BDipole-dipole forces
    3. CHydrogen bonding
    4. DDispersion forces
    Show the answer

    Answer: D. Dispersion forces

    The answer is dispersion forces. Dispersion forces come from instantaneous dipoles, created when electrons momentarily shift to one side, so they act on every molecule, polar or nonpolar. Dipole-dipole forces act only between polar molecules, and hydrogen bonds form only when there is H bonded to F, O or N. Ionic bonding is not an intermolecular force.

    Remember: Dispersion forces always act in polar molecules too. They are not ‘a force only for nonpolar molecules’.

    Did you know? In 1930, the German physicist Fritz London explained this force using quantum mechanics. That’s why it’s also called the ‘London dispersion force’.

  26. 24.Of the halogen molecules F₂, Cl₂, Br₂ and I₂, which is a solid at room temperature?

    1. ABr₂
    2. BCl₂
    3. CI₂
    4. DF₂
    Show the answer

    Answer: C. I₂

    The answer is I₂. Halogen molecules are all nonpolar, so only dispersion forces act between them, and the larger the molecular mass, the stronger the dispersion forces. Molecular mass increases F₂ < Cl₂ < Br₂ < I₂, so at room temperature F₂ and Cl₂ are gases, Br₂ is a liquid and I₂ is a solid. It’s easy to think Br₂ is a solid, but it’s a reddish-brown liquid.

    Remember: The halogen states go ‘gas, gas, liquid, solid’. Bromine is a nonmetal that is liquid at room temperature.

    Did you know? Iodine easily sublimes when heated, turning into a purple gas. It’s also in the wound antiseptic ‘povidone-iodine’.

Next: part 2 of 3Today's five Senior Chemistry II questions

More Senior Chemistry II topics

Enthalpy and Equilibrium · Reaction Rates and Catalysts · Electrochemistry

Other levels: Year 7 · Year 8 · Year 9 · Year 10 · Senior Chemistry I. Lesson plans: free worksheets.

Last updated 10 November 2026.