Electrochemistry (part 2 of 3)
21 practice questions for Senior Chemistry II (Year 12, Grade 12) chemistry. Try each one, then open the answer for the explanation and a tip to remember it.
1.What is the role of the salt bridge in a Daniell cell?
- AIt lets ions move to keep the charges in the two solutions balanced
- BIt turns zinc into copper
- CIt moves electrons directly
- DIt keeps the temperature of the solutions constant
Show the answer
Answer: A. It lets ions move to keep the charges in the two solutions balanced
The answer is that it lets ions move to keep the charges in the two solutions balanced. As the reaction proceeds, Zn²⁺ builds up on the zinc side, creating (+) charge, and Cu²⁺ decreases on the copper side, leaving (−) charge. Ions in the salt bridge move to both sides to prevent this, so current keeps flowing. Electrons move through the wire, not the salt bridge.
Remember: Without a salt bridge, charge builds up on one side and the current soon stops.
Did you know? Instead of a salt bridge, the two solutions are sometimes separated by a porous ceramic barrier with tiny holes. Only ions can slowly pass through the holes.
2.While a Daniell cell is working, how do the masses of the zinc plate and copper plate change?
- AThe zinc plate decreases and the copper plate increases
- BBoth electrodes decrease
- CNeither electrode changes
- DThe zinc plate increases and the copper plate decreases
Show the answer
Answer: A. The zinc plate decreases and the copper plate increases
The answer is that the zinc plate decreases and the copper plate increases. At the (−) electrode, Zn → Zn²⁺ + 2e⁻, so zinc atoms become ions and dissolve into the solution, making the zinc plate lighter. At the (+) electrode, Cu²⁺ + 2e⁻ → Cu, so copper is deposited and the copper plate gets heavier. The two electrodes change in opposite ways.
Remember: The electrode that is oxidized dissolves and gets lighter; the electrode where metal is deposited gets heavier.
Did you know? When 0.1 mol of zinc (about 6.5 g) dissolves, 0.1 mol of copper (about 6.4 g) builds up. Their atomic masses are similar, so the two changes are almost equal.
3.If a Daniell cell runs for a long time, what happens to the blue color of the copper(II) sulfate solution?
- AIt turns red
- BIt gradually gets paler
- CIt gradually gets deeper
- DIt doesn’t change
Show the answer
Answer: B. It gradually gets paler
The answer is ‘it gradually gets paler’. The blue color of copper(II) sulfate solution comes from Cu²⁺. When the cell runs, the reaction Cu²⁺ + 2e⁻ → Cu at the (+) electrode keeps reducing Cu²⁺, so the color fades. Red copper builds up on the copper plate; the solution doesn’t turn red.
Remember: Judge changes in solution color by whether the ‘ion that gives the color’ is increasing or decreasing.
Did you know? Cu²⁺ dissolved in water absorbs orange and red light. When those colors are removed from white light, the light that’s left looks blue to our eyes.
4.Which statement about standard reduction potential is correct?
- AAll metals have the same value
- BThe larger the value, the more easily it is oxidized
- CThe larger the value, the more easily it is reduced
- DA substance with a value of 0 doesn’t react
Show the answer
Answer: C. The larger the value, the more easily it is reduced
The answer is ‘the larger the value, the more easily it is reduced’. Standard reduction potential shows the tendency to gain electrons, so a larger value means it’s reduced more easily, and a smaller value means it’s oxidized more easily. For example, Cu²⁺/Cu (+0.34 V) is reduced more easily than Zn²⁺/Zn (−0.76 V). A value of 0 doesn’t mean it doesn’t react.
Remember: The smaller (more negative) a metal’s reduction potential, the more reactive it is and the more easily it is oxidized.
Did you know? ‘Standard’ means 25 °C, ion concentrations of 1 M and gas pressures of 1 atm. If the conditions change, the potential values shift slightly.
5.What is the standard reduction potential of the standard hydrogen electrode?
- A−1 V
- B0 V
- C1 V
- D1.10 V
Show the answer
Answer: B. 0 V
The answer is 0 V. An electrode’s potential can’t be measured as an absolute value, so the potential of the standard hydrogen electrode (2H⁺ + 2e⁻ → H₂) was set as the reference, 0 V. The standard reduction potentials of other electrodes are found by comparing them with this reference. 1.10 V is the standard cell potential of the Daniell cell, so it’s wrong.
Remember: 0 V doesn’t mean ‘doesn’t react’; it means it’s the reference point for comparison.
Did you know? The standard hydrogen electrode is made by dipping a platinum plate into a 1 M H⁺ solution and bubbling in hydrogen gas at 1 atm.
6.Given standard reduction potentials Cu²⁺/Cu = +0.34 V and Zn²⁺/Zn = −0.76 V, what is the standard cell potential of a Daniell cell?
- A−1.10 V
- B0.42 V
- C0.34 V
- D1.10 V
Show the answer
Answer: D. 1.10 V
The answer is 1.10 V. The formula is E°cell = E°(+) − E°(−). Copper, with the larger reduction potential, is the (+) electrode and zinc is the (−) electrode, so substituting gives 0.34 − (−0.76) = 1.10 V. Simply adding the two values gives 0.34 + (−0.76) = −0.42, leading to wrong answers like 0.42 V.
Remember: Subtracting a negative becomes adding. Be careful with the signs in 0.34 − (−0.76).
Did you know? This cell’s 1.1 V is a little lower than a common alkaline battery (1.5 V).
7.Given standard reduction potentials Ag⁺/Ag = +0.80 V and Cu²⁺/Cu = +0.34 V, what is the standard cell potential of a cell made with these two electrodes?
- A0.80 V
- B1.14 V
- C−0.46 V
- D0.46 V
Show the answer
Answer: D. 0.46 V
The answer is 0.46 V. The formula is E°cell = E°(+) − E°(−). Silver, with the larger reduction potential, is the (+) electrode and copper is the (−) electrode, so substituting gives 0.80 − 0.34 = 0.46 V. Adding the two values to get 1.14 V is wrong, and subtracting in the wrong order gives −0.46 V. The potential of a spontaneous cell is always positive.
Remember: Even if both potentials are positive, don’t add them; subtract the smaller value from the larger.
Did you know? Lithium has one of the lowest standard reduction potentials, about −3.04 V, so it’s used in lithium batteries, which need a high voltage.
8.In a chemical cell made with a magnesium plate and a copper plate, which becomes the (−) electrode?
- AThe copper plate
- BNeither
- CBoth electrodes
- DThe magnesium plate
Show the answer
Answer: D. The magnesium plate
The answer is the magnesium plate. Magnesium is far more reactive than copper (its standard reduction potential is smaller), so it is oxidized first as Mg → Mg²⁺ + 2e⁻. The electrode that gives away electrons is the (−) electrode, so the magnesium plate is the (−) electrode and the copper plate is the (+) electrode, which accepts electrons.
Remember: If you know the reactivity series (K Ca Na Mg Al Zn Fe … Cu Ag), you can find the (−) electrode right away.
Did you know? Magnesium is used in batteries that use seawater as the electrolyte, so it’s found in devices that switch on when wet, such as emergency lights on life jackets.
9.A zinc plate and a copper plate are stuck into a lemon and joined with a wire, and a current flows. Which is the (−) electrode?
- AThe zinc plate
- BThe lemon juice
- CThe wire
- DThe copper plate
Show the answer
Answer: A. The zinc plate
The answer is the zinc plate. Zinc is more reactive than copper, so it is oxidized as Zn → Zn²⁺ + 2e⁻ and becomes the (−) electrode. Lemon juice only acts as an electrolyte containing ions; it isn’t an electrode. On the copper plate’s surface, H⁺ in the lemon juice gains electrons and hydrogen forms.
Remember: A fruit battery works on the same principle as a voltaic cell. The fruit is the electrolyte and the two metals are the electrodes.
Did you know? You can make a cell by sticking the plates into a potato, an apple or vinegar instead of a lemon. Anything with dissolved ions will work.
10.Which statement about electrolysis is correct?
- AIt uses heat to melt substances
- BIt uses electrical energy to drive a redox reaction that wouldn’t happen on its own
- CIt gets electrical energy from a redox reaction
- DIt uses light to break down substances
Show the answer
Answer: B. It uses electrical energy to drive a redox reaction that wouldn’t happen on its own
The answer is that it uses electrical energy to drive a redox reaction that wouldn’t happen on its own. For example, water doesn’t split into hydrogen and oxygen by itself, but it does when electricity is passed through it. ‘It gets electrical energy from a redox reaction’ describes a chemical cell, so it’s wrong.
Remember: Electrolysis ‘uses’ electricity to cause a reaction; a cell ‘gets’ electricity from a reaction.
Did you know? In 1807, Humphry Davy in Britain used electrolysis to isolate potassium and sodium as metals for the first time.
Getting these right? In Valence, a correct answer earns research funds for your next card. Play free and set the quiz level to Chemistry II.
11.In electrolysis, what reaction happens at the electrode connected to the (+) terminal of the power supply?
- AReduction
- BOxidation
- CNo reaction happens
- DNeutralization
Show the answer
Answer: B. Oxidation
The answer is oxidation. The (+) terminal of the power supply pulls electrons away from its electrode, so at this electrode, anions and other species lose electrons: oxidation. For example, 2Cl⁻ → Cl₂ + 2e⁻ is a (+) electrode reaction. Reduction happens at the (−) electrode, where electrons are supplied.
Remember: In electrolysis, oxidation is at the (+) electrode and reduction at the (−) electrode. It can feel backward compared with a chemical cell, so be careful.
Did you know? Some swimming pools electrolyze slightly salty water, making chlorine at the (+) electrode to disinfect the water.
12.When water is electrolyzed, which correctly gives the gases formed at the (−) and (+) electrodes and their volume ratio?
- A(−) oxygen, (+) hydrogen, volume ratio 2 : 1
- B(−) hydrogen, (+) oxygen, volume ratio 1 : 1
- C(−) hydrogen, (+) oxygen, volume ratio 1 : 2
- D(−) hydrogen, (+) oxygen, volume ratio 2 : 1
Show the answer
Answer: D. (−) hydrogen, (+) oxygen, volume ratio 2 : 1
The answer is (−) hydrogen, (+) oxygen, volume ratio 2 : 1. At the (−) electrode, water gains electrons to form hydrogen, and at the (+) electrode, water loses electrons to form oxygen. In the overall reaction 2H₂O → 2H₂ + O₂, the mole ratio of hydrogen to oxygen is 2 : 1, so the volume ratio is 2 : 1 too. 1 : 2 is the wrong answer with the ratio reversed.
Remember: Remember ‘hydrogen 2 : oxygen 1’ in the same order as the atoms in water, H₂O (H 2 : O 1).
Did you know? In 1800, the year the voltaic cell appeared, Nicholson and Carlisle in Britain used it to split water into hydrogen and oxygen for the first time.
13.Why is a little sodium sulfate added when electrolyzing water?
- ATo get sodium instead of oxygen
- BTo make the hydrogen gas heavier
- CTo lower the boiling point of water
- DPure water barely conducts electricity, so it helps current flow
Show the answer
Answer: D. Pure water barely conducts electricity, so it helps current flow
The answer is that pure water barely conducts electricity. For current to flow, there must be ions in the solution that can move, and pure water has very few ions. So sodium sulfate, an electrolyte, is added to help current flow. Na⁺ is harder to reduce than water, so no sodium is produced.
Remember: Sodium sulfate only helps the current; it doesn’t take part in the reaction, so the products are still hydrogen and oxygen.
Did you know? The danger of electric shock comes less from water itself than from the ions dissolved in tap water and sweat. The ‘ultrapure water’ in semiconductor factories has almost all ions removed, so it barely conducts electricity.
14.When water is electrolyzed and 4 mol of electrons flow, how many moles of oxygen gas are produced?
- A2 mol
- B0.5 mol
- C4 mol
- D1 mol
Show the answer
Answer: D. 1 mol
The answer is 1 mol. The (+) electrode equation is 2H₂O → O₂ + 4H⁺ + 4e⁻, so 1 mol of oxygen forms when 4 mol of electrons flow. The same 4 mol of electrons produce 2 mol of hydrogen at the (−) electrode, so 2 mol is the wrong answer that confuses it with the amount of hydrogen.
Remember: For the same amount of charge, oxygen forms 1 molecule per 4 electrons, and hydrogen forms 1 molecule per 2 electrons.
Did you know? On the International Space Station, water is electrolyzed to make oxygen for the crew to breathe.
15.When molten sodium chloride is electrolyzed, what is produced at the (−) electrode?
- AChlorine
- BOxygen
- CSodium
- DHydrogen
Show the answer
Answer: C. Sodium
The answer is sodium. Molten sodium chloride contains no water, only Na⁺ and Cl⁻. So at the (−) electrode, Na⁺ + e⁻ → Na produces sodium metal, and at the (+) electrode, Cl⁻ is oxidized to chlorine gas. Hydrogen is what forms at the (−) electrode in an aqueous solution, where water is present, so it’s wrong.
Remember: Tell ‘molten’ apart from ‘aqueous solution’. With no water, sodium metal comes out.
Did you know? Sodium chloride melts at about 801 °C. Factories mix in calcium chloride to lower the melting point before electrolyzing it.
16.When aqueous sodium chloride solution is electrolyzed, what is produced at the (−) electrode?
- AOxygen gas
- BHydrogen gas
- CChlorine gas
- DSodium metal
Show the answer
Answer: B. Hydrogen gas
The answer is hydrogen gas. In aqueous solution, water is reduced far more easily than Na⁺, so the reaction 2H₂O + 2e⁻ → H₂ + 2OH⁻ happens at the (−) electrode. So hydrogen gas forms instead of sodium metal. Chlorine gas is produced at the (+) electrode when Cl⁻ is oxidized.
Remember: In aqueous solution, ions like K⁺, Na⁺ and Ca²⁺ aren’t reduced; water is reduced instead.
Did you know? Salt-water electrolysis plants place a membrane that lets only cations through between the electrodes, so the chlorine and sodium hydroxide produced don’t mix.
17.When copper(II) chloride solution is electrolyzed, what happens at the (−) electrode?
- AThe electrode dissolves away
- BRed copper is deposited
- COxygen gas is produced
- DChlorine gas is produced
Show the answer
Answer: B. Red copper is deposited
The answer is that red copper is deposited. Reduction happens at the (−) electrode, so Cu²⁺ + 2e⁻ → Cu deposits copper on the electrode surface. Cu²⁺ is reduced more easily than water, so copper comes out instead of hydrogen. Chlorine gas forms at the (+) electrode when Cl⁻ is oxidized, so it isn’t a (−) electrode change.
Remember: Ions of less reactive metals, such as Cu²⁺ and Ag⁺, are deposited as metal at the (−) electrode even in aqueous solution.
Did you know? Chlorine gas is a yellowish green, so its name comes from a Greek word meaning ‘pale green’.
18.When copper(II) sulfate solution is electrolyzed and 1 mol of electrons flows, how many moles of copper are deposited at the (−) electrode?
- A0.5 mol
- B0.25 mol
- C1 mol
- D2 mol
Show the answer
Answer: A. 0.5 mol
The answer is 0.5 mol. The (−) electrode equation is Cu²⁺ + 2e⁻ → Cu, so 1 mol of copper is deposited for every 2 mol of electrons. As a proportion, 2 : 1 = 1 : x, so x = 0.5 mol. If you miss that Cu²⁺ needs 2 electrons, it’s easy to answer 1 mol.
Remember: Moles of metal deposited = moles of electrons ÷ charge number of the ion.
Did you know? The relationship between the amount of electricity and the amount of substance produced was found by experiment by Faraday around 1833, so it’s called ‘Faraday’s law’.
19.What is the approximate charge carried by 1 mol of electrons?
- AAbout 6.02 C
- BAbout 96500 C
- CAbout 1 C
- DAbout 22.4 C
Show the answer
Answer: B. About 96500 C
The answer is about 96500 C. One electron has a charge of about 1.6 × 10⁻¹⁹ C, and multiplying by 1 mol (6.02 × 10²³ electrons) gives about 96500 C. This value is called the Faraday constant (F). 6.02 is the first digits of Avogadro’s number, and 22.4 is the volume (L) of 1 mol of gas, so they’re wrong.
Remember: 1 F = 96500 C = 1 mol of electrons. It’s the starting point for electrolysis calculations.
Did you know? The charge of a single electron was first measured precisely around 1909 by Millikan in the United States, using an experiment with tiny oil droplets.
20.In electroplating, which terminal is the object to be plated connected to?
- AThe (+) terminal of the power supply
- BEither terminal
- CIt isn’t connected to the power supply
- DThe (−) terminal of the power supply
Show the answer
Answer: D. The (−) terminal of the power supply
The answer is the (−) terminal of the power supply. Reduction happens at the (−) electrode, where metal cations in the solution gain electrons and are deposited as metal. So the object must be connected to the (−) terminal for metal to coat its surface. If it were connected to the (+) terminal, the object could instead be oxidized and dissolve.
Remember: Remember the pair for plating: ‘object to be coated at (−), coating metal at (+)’.
Did you know? The shiny silver look of car trim and faucets is mostly chromium plating. It prevents rust and resists scratches.
Getting these right? In Valence, a correct answer earns research funds for your next card. Play free and set the quiz level to Chemistry II.
21.When silver-plating a spoon, which electrode connected to the (+) terminal and which electrolyte are suitable?
- AThe spoon, silver nitrate solution
- BA silver plate, sugar water
- CA silver plate, silver nitrate solution
- DA copper plate, distilled water
Show the answer
Answer: C. A silver plate, silver nitrate solution
The answer is a silver plate and silver nitrate solution. The silver plate at the (+) electrode dissolves as Ag → Ag⁺ + e⁻, topping up the Ag⁺ in the solution, and on the spoon’s surface at the (−) electrode, Ag⁺ + e⁻ → Ag deposits silver. The spoon must be connected to the (−) terminal, and sugar water and distilled water have no ions, so they can’t be electrolytes.
Remember: The electrolyte must contain ions of the plating metal (Ag⁺).
Did you know? Olympic gold medals are actually made mostly of silver, coated with gold. The rules only require at least about 6 g of gold.
More Senior Chemistry II topics
States of Matter and Solutions · Enthalpy and Equilibrium · Reaction Rates and Catalysts
Other levels: Year 7 · Year 8 · Year 9 · Year 10 · Senior Chemistry I. Lesson plans: free worksheets.